Bio Sculpture

gel overlays

Step-by-Step: Gel Overlays

Work on a prepared dry nail, treated with BS Vitamin Dose or buffed BS Executive Base on the nail plate. 2091

		STEP1. Firstly, apply a thin layer BS Clear Base Gel onto the natural nail. Keep 2 mm away from the cuticle to prevent a step.

		STEP2. Cure for 2 minutes – Do not wipe

		STEP 3. Scoop up gel on one side of the brush, pull back the nail wall and offload the colour gel in the center of the nail.

		STEP 4. Hold the brush fairly upright and apply the cuticle outline.

		STEP 5. Turn the finger, pull away the nail wall and with controlled strokes,

		STEP5.2 apply the colour gel to cover the lower curve and straight sides.

		STEP 6. Scoop up more gel, use less pressure on the brush and bring the brush handle down to 45%. Apply soft, gliding, finishing strokes down the center of the nail, pulling past the free edge.

		STEP 7. Cure for two minutes then apply and cure a second layer of colour gel.

		STEP 8. Finish off with a strengthening layer of Bio Sculpture S-gel and cure for 2 minutes and apply Top Coat or cure for 4 minutes for a high-gloss finish.

		STEP 9. Sanitize judge your nails. Make sure that the cuticle and free edge areas are thin and that the upper arch is smooth with an even cure. If it is not the S-Gel may be buffed to the required result. Lastly apply Bio Sculpture Top Coat.